Filter
Top Products
SECTION 4—FRONT RIGGINGS
Part No. 1163197 21 Insignia
™
Adjusting Footplate Height
NOTE:Forthisprocedure,refertoFIGURE 4.2onpage 21.
NOTE:Thisprocedureappliestotheswingawayfrontriggings
andswingawayelevatinglegrest.
1. Removethefrontriggingassembly.Referto
Installing/RemovingFrontRiggingsAssembly
on
page 20.
2. Pullthecamlockleverdowntounlockedposition.
NOTE:Theelevatinglegresthastwosetsofreleasebuttons,one
setabovetheother.Eachsetwillbevisibleoneatatimeallowing
finerfootplateheightadjustment.
3. Pushinthespringbuttonsandrepositionthefootplate
assemblytothe
desiredheight.
4. Ensurethatthespringbuttonsfullyprotrudefrom
adjustmentholesonbothsidesofthefrontrigging
support.
5. Rotatecamlockleveruptothelockedposition.
6. Reinstalltheswingawayfrontriggingassembly.Refer
toInstalling/RemovingFrontRiggingsAssembly
on
page 20.
FIGURE 4.2 Adjusting Footplate Height
Raising/Lowering Elevating Legrest Assembly
NOTE:Forthisprocedure,refertoFIGURE 4.3.
ƽ WARNING
Ensure hands and fingers are clear of elevating legrest mechanism before pushing release lever
to lower the elevating legrest. Otherwise injury may occur due to pinch points.
The user’s leg MUST be supported by an assistant before attempting to lower legrest.
NOTE:Forthisprocedure,refertoFIGURE 4.3onpage21.
1. Toraisetheelevatinglegrest,theassistantshouldhold
thesupporttubeandraisetheelevatinglegrestuntilthe
desiredheightisobtained.
2. Tolowertheelevatinglegrest,performthefollowing:
A. Supportuserlegwithonehand.
B. Pushreleaseleverdownwardwithother
hand.
C. Gently,loweruserlegdownandrestagainstthe
legrest.
FIGURE 4.3 Raising/Lowering Elevating Legrest
Assembly
Cam Lock Lever (Shown
in Locked Position)
Spring Buttons (Located on both sides
of each front rigging support)
Front Rigging Support
Adjustment
Holes
Release Lever
Support Tube