Support User Manuals

Invacare 1163197 Wheelchair User Manual

Open as PDF

of 52

SECTION 4—FRONT RIGGINGS

Insignia

™

22 Part No. 1163197

Replacing Heel Loop

NOTE:Forthisprocedure,refertoFIGURE 4.4.

1. Pullthecamlockleverdowntotheunlockedposition.

2. Pushinthereleasebuttonsandremovethefootplateassemblyfromthefrontriggingsupport.

3. Removethemountingscrew,spacerandlocknutthatsecuretheheellooptothefootplate.

4. Removeexistingheelloopfromslide

tube.

5. Installnewheelloopontoslidetube.

6. Installthemountingscrew,spacerandlocknuttosecuretheheellooptothefootplate.Tightensecurely.

7. Inserttheslidetubeint othefrontriggingsupportandadjusttodesiredheight.

8. Ensurethatthereleasebuttonsfullyprotrudefromholesonbothsidesof

thefrontriggingsupport.

9. Rotatecamlockleveruptothelockedposition.

FIGURE 4.4 Replacing Heel Loop

Adjustment

Holes

Cam Lock

Lever

Footplate

Assembly

Release Button

Front Rigging

Support

Heel Loop

Slide Tube

Mounting Screw,

Spacer and Locknut

previous next