Support User Manuals

Invacare 1163197 Wheelchair User Manual

Open as PDF

of 52

SECTION 5—ARMS

Part No. 1163197 23 Insignia

™

SECTION 5—ARMS

ƽ WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is

tightened securely. Otherwise injury or damage may occur.

Removing/Installing the Armrest

NOTE:Forthisprocedure,refertoFIGURE 5.1.

Removing

1. Whilepressingandholdingthereleasebutton,liftuponarmrestandremovefromtheflipbackarm.

Installing

1. Pressandholdreleasebutton.

2. Insertchannelofarmrestintobracketonflipbackarm.

3. Adjustarmresttodesiredheight.RefertoAdjustingArmrestHeight

onpage 23.

Adjusting Armrest Height

ƽ WARNING

Make sure the armrest is locked in position before using the wheelchair.

NOTE:Forthisprocedure,refertoFIGURE 5.1.

1. Whilepressingandholdingthereleasebutton,adjustthearmresttothedesiredheight.

NOTE:An“audible”clickwillbeheardwhenarmrestlocksinposition.

2. Letgoofreleasebuttontolockarmrestinplace.

FIGURE 5.1 Removing/Installing the Armrest/Adjusting Armrest Height

Armrest

Release Button

Channel

Release

Button

Flip Back Arm

Flip Back

Arm

Bracket

previous next