Filter
Top Products
Part No. 82258 Genie Z-80/60 31
Operator's ManualFirst Edition · Third Printing
Specifications
Z-80/60
Height, working maximum 86 ft 26.2 m
Height, platform maximum 80 ft 24.4 m
Height, stowed maximum 9 ft 10 in 3 m
Horizontal reach maximum 60 ft 18.3 m
Width 8 ft 2 in 2.5 m
Length, stowed 37 ft 11.3 m
Length, stowed for transport 30 ft 9.1 m
Maximum load capacity 500 lb 227 kg
Wheelbase 9 ft 4 in 2.8 m
Ground clearance 12 in 30.5 cm
Turning radius, outside
2 wheel steer 24 ft 7 in 7.5 m
4 wheel steer 15 ft 2 in 4.6 m
Turning radius, inside
2 wheel steer 14 ft 6 in 4.4 m
4 wheel steer 7 ft 2.1 m
Turntable rotation (degrees) 360° continuous
Turntable tailswing,
secondary boom lowered 10 ft 10 in 3.3 m
Turntable tailswing,
secondary boom raised 3 ft 90 cm
Power source Perkins Diesel 704-30
(choice) Deutz Diesel F4L913
GM 3.0L
Drive speed, stowed 3 mph 4.8 km/h
40 ft/9.1 sec 12.2 m/9.1 sec
Drive speed, 0.7 mph 1.1 km/h
raised or extended 40 ft/40 sec 12.2 m/40 sec
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Controls 12V DC proportional
Platform dimensions, 6 foot 72 in x 30 in
(length x width) 1.8 m x 76 cm
Platform dimensions, 8 foot 96 in x 36 in
(length x width) 2.4 m x 91 cm
Platform leveling self-leveling
Platform rotation 160°
AC outlet in platform standard
Hydraulic pressure (maximum) 3200 psi
(boom functions) 220 bar
Tire size 18-625, 16 ply FF
Gradeability, 4WD, stowed 50 %
Gradeability, 2WD, stowed 30 %
Fuel tank capacity 40 gallons 151 liters
Weight See Serial Plate
(Machine weights vary with option configurations)
Airborne noise emissions 80 dB
Maximum sound level at normal operating workstations
(A-weighted)
Floor Loading Information
GVW+Rated Load 38,000 lbs 17,237 kg
Axle load, maximum 27,813 lbs 12,616 kg
Wheel load, maximum 13,530 lbs 7044 kg
Localized pressure per tire 217 psi 15.3 kg/cm
2
1496 kPa
Occupied pressure 358 psf 2468 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations.
It should be used only with adequate safety factors.