Filter
Top Products
28 Genie Z-80/60 Part No. 82258
Operator's Manual First Edition · Third Printing
Transport and Lifting Instructions
Observe and Obey:
The transport vehicle must be parked on a level
surface.
The transport vehicle must be secured to
prevent rolling while the machine is being
loaded.
Be sure the vehicle capacity, loading surfaces
and chains or straps are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
Be sure the turntable is secured with the
turntable rotation lock before transporting. Be
sure to unlock the turntable for operation.
Free-wheel Configuration for
Winching
Chock the wheels to prevent the machine from
rolling.
2WD models: Release
the non-steer wheel
brakes by turning over
the drive hub
disconnect caps.
4WD models: Release
the wheel brakes by
turning over all four
drive hub disconnect
caps.
Be sure the winch line is properly secured to the
drive chassis tie points and the path is clear of all
obstructions.
Reverse the procedures described to re-engage the
brakes.
Note: The pump free-wheel valve should always
remain closed.
Disengage
Engage