Filter
Top Products
Part No. 82258 Genie Z-80/60 13
Operator's ManualFirst Edition · Third Printing
MAINTENANCE
Deutz F4L 913 Engine
Engine oil viscosity requirements
below 60°F / 15.5°C 5W-30
synthetic
-10°F to 90°F / -23°C to 32°C 10W-40
above -4°F / -34°C 15W-40
Engine oil should have properties of API classification
CC/SE or CC/SF grades OR ACEA classification E1-96.
Perkins 704-30 Engine
Oil viscosity requirements
below 60°F / 15.5°C 15W-40
-10°F to 90°F / -23°C to 32°C 10W-30
above -4°F / -20°C 15W-40
Engine oil should have properties of API classification
CF4 grade. Units ship with 10-40 CC/SG.
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in
the oil level that might indicate the presence of
hydraulic system problems.
1 Be sure that the engine is off and the boom is in
the stowed position.
2 Visually inspect the sight gauge located on the
side of the hydraulic oil tank.
Result: The hydraulic oil level should be within
the top 2 inches / 5 cm of the sight gauge.
Hydraulic oil specifications
Hydraulic oil type Chevron Rykon®
Premium MV equivalent