Filter
Top Products
18 Genie Z-80/60 Part No. 82258
Operator's Manual First Edition · Third Printing
FUNCTION TESTS
Test the Steering (models with 4 wheel steer)
37 Push the steer
mode select
button for square-
end (blue arrow)
steer.
38 Press down the foot switch.
39 Slowly move the drive/steer control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker switch in
the direction indicated by the blue triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis.
40 Push the steer
mode select
button for circle-
end (yellow arrow)
steer.
41 Press down the foot switch.
42 Slowly move the drive/steer control handle in the
direction indicated by the yellow triangle on the
control panel OR press the thumb rocker switch in
the direction indicated by the yellow triangle.
Result: The circle-end wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
43 Push the steer
mode select
button for crab
steer.
44 Press down the foot switch.
45 Slowly move the drive/steer control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker switch in
the direction indicated by the blue triangle..
Result: All wheels should turn in the direction
that the blue triangles point on the drive
chassis.
46 Push the steer
mode select
button for
coordinated steer.
47 Press down the foot switch.
48 Slowly move the drive/steer control handle in the
direction indicated by the blue triangle on the
control panel OR press the thumb rocker switch
in the direction indicated by the blue triangle.
Result: The square-end wheels should turn in
the direction that the blue triangles point on the
drive chassis. The circle-end wheels should turn
in the direction that the yellow triangles point on
the drive chassis.
Test the Steering (models with 2 wheel steer)
49 Press down the foot switch.
50 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the drive/steer control handle in the
direction indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
51 Press the thumb rocker switch in the direction
indicated by the yellow triangle on the control
panel OR slowly move the drive/steer handle in
the direction indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.