Filter
Top Products
24 Genie Z-80/60 Part No. 82258
Operator's Manual First Edition · Third Printing
To Drive
1 Press down the foot switch.
2 Increase speed: Slowly move the
drive/steer control handle in the
direction indicated by the blue or
yellow arrows.
Decrease speed: Slowly move the drive/steer
control handle toward center.
Stop: Return the drive/steer control handle to
center or release the foot switch.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Machine travel speed is restricted when the boom
is raised or extended.
Drive Enable
Light on indicates that the
boom has moved past either
circle-end wheel and the
drive function is turned off.
To drive, push the drive enable button and slowly
move the drive/steer control handle off center.
If the drive/steer control handle is not moved within
two seconds of pushing the drive enable button,
the drive function will not operate. Release and
push the drive enable button again.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
OPERATING INSTRUCTIONS
Regulated Generator (if equipped)
To operate the generator, press the generator
button. The indicator light will come on and the
engine will continue to run.
Plug power tools into the power to platform GFCI
outlet.
To turn off the generator, push the generator
button. The indicator light will turn off.
Engine Idle Select (rpm)
Select the engine idle (rpm) by pressing the select
button. The indicator light next to the current
setting will be on.
· Rabbit and foot switch symbol:
foot switch activated high idle
· Turtle symbol: low idle
· Rabbit symbol: high idle