Filter
Top Products
Part No. 82258 Genie Z-80/60 25
Operator's ManualFirst Edition · Third Printing
OPERATING INSTRUCTIONS
Check Engine Light
Light on and engine stopped: Tag the machine and
remove from service.
Light on and engine still running: Contact service
personnel within 24 hours.
Operating Envelope Indicator
Lights
The operating envelope indicator lights will come on
to notify the operator that a function has been
interrupted and/or an action is required by the
operator.
Lower Primary Boom indicator
light flashing: Lower the primary
boom until the indicator light is
off.
Machine Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. Move the machine to
a firm level surface.
Platform Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. The Platform Level toggle switch will only
work in the direction that will level the platform.
Level the platform until the indicator light is off.
Stopping the Engine
Push in the red Emergency Stop button and turn
the key switch to the off position.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the circle-end wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.