Filter
Top Products
15. Dimension 330 x 230 x 60 (mm)
Weight around 1.5kg
II Configuration, Installation and Application
The wireless electronic crane scale is mainly composed of scale body and indicator, accessories
like charger, cable, are also supplied.
1. Configuration of the scale body
This part is makes up of weighing load cell, carrier and transmitting mechanism, case, A/D
module, wireless digital transmitter, battery, etc.
2. External layout of indicator
Micro-printer LCD Screen Keypad Antenna
(Figure 2) Front layout
Printer Port RS-232/422/485 Signal Cable Power Switch Charger socket
Scoreboard Interface Calibration Switch
(Figure 3)Rear Wiring Layout
3. Wireless working mode:
Usually, XK3190-H2B Indicator is used in wireless transmitting electronic crane scale. Install
the transmitting antenna before operation, and then open the small cover on the scale body to
install the battery, after inserting battery plug into the battery socket and turning on the switch, the