Filter
Top Products
VII Trouble Shooting
Trouble-shooting overview
Number Trouble Reason Trouble shooting
1 Press <<Power
on/Reset”, the
annunciator is
not light and no
figure
displayed
1. No voltage in instrument
battery
2. The power switch in the back
of instrument is not on.
1. Check and solve the
power problem
2. Turn on the switch.
2 No annunciator
twinkles
1. The signal is not connected
during cable operation.
2. No antenna installed during
wireless operation.
3. No scale body battery
installed or low voltage
1. connected signal cable;
2. Install the antenna;
3. Install new battery with full
power
3 Instrument
alarm,
No weight
value displayed
1. The weight of the goods
exceed the weight limit or
F.S+9e
2. The battery voltage of scale
body is too low
1. Reset weight limit or
decrease the weight of
goods;
2. Install new battery with full
power
4 The printed
figure is too
vague
Ink ribbon is used up Replace it with new ink ribbon
5 No figure
printed out
The ink ribbon is out of slot Reinstall the ink ribbon
6 Paper moving
problem or
stopped
Too much dust on printer head Clean the printer head and add
some oil
7 Too weak
signal or
irregular
twinkle of
annunciator
1. No battery installed in scale
body
2. No antenna installed
3. Inappropriate antenna
specification
4. Wireless communicating
distance is too long
1. Install battery
2. Install antenna
3. Replaced right antenna
4. Shorten the distance
between the indicator and
the scale body
Appendix
Specification of optional, wearable, quick-wear and expendable parts
Number Name Model Code Remarks
1 Storage battery 1.6Ah/12V NiH battery Indicator battery
2 Storage battery 2.2Ah/12V NiCd battery Scale-body battery