Main > Utilities > Alarm Clock
2
ಘ
Select On/Set. Press ACT.
3
ಘ
Select Add Alarm. Press ACT.
4
ಘ
Enter the hour (flashing). Press ACT.
5
ಘ
Enter the minutes (flashing). Press ACT.
6
ಘ
Repeat steps 3 through 5 to program additional alarm times. Exit the menus when you are done.
Remote control option
The factory setting for this feature is off. You may want to explore the remote option after you have become
completely familiar with the basic functions of your pump. It is important that you consult with your healthcare
professional before using this feature. Remote controls can be purchased from Medtronic Diabetes.
Refer to the remote control user guide for operating instructions.
NOTE: The use of RF (radio frequency) devices with the pump reduces battery life.
ಘ
To use the remote control, these pump settings must be programmed:
• Remote Options = On
• Remote control ID code entered in pump (code is on back of remote)
• Easy Bolus = On
Turn on remote control option
WARNING: If there is a LOW BATTERY condition, the pump will not receive signals from the remote. To ensure
the pump communicates with the remote control, make sure the pump does not have a low battery. (Replacing
the low battery with a new battery will restore remote control function.)
1
ಘ
Go to the REMOTE OPTION screen.
Main > Utilities > Remote Option
2
ಘ
Select On, then press ACT.
3
ಘ
The REMOTE ID MENU screen appears. Add, delete or review your remote ID as described in the next section.
Exit the menus if you are done.
Utilities 113