Filter
Top Products
8
ಘ
Press ACT to accept and deliver the bolus. The BOLUS DELIVERY screen appears with an open circle indicating
that your pump is in Special Mode. The pump beeps/vibrates at the start of the bolus. During bolus delivery,
the pump returns to the HOME screen. If you want to see the progress of the delivery, press ESC to see the
STATUS screen. The pump beeps/vibrates at the end of the bolus, and the open circle disappears.
Easy bolus
The EASY BOLUS button allows a quick way to deliver a Normal bolus. You will pre-set the settings for this
feature in the EASY BOLUS OPTION screen in the BOLUS MENU. Your pump is sent from the factory with the Easy
Bolus feature set to on. If you do not want to use Easy Bolus, turn it off.
After you set up Easy Bolus, with each
press, you can increase the Normal bolus amount by a fixed amount,
called a step. Before you can deliver an Easy Bolus, you must set the amount in the EASY BOLUS ENTRY screen. This
amount equals the number of units of insulin for each step. The maximum number of steps can equal up to your
maximum bolus limit. When using vibrate mode, EASY BOLUS is limited to 20 steps or maximum bolus, whichever
comes first.
After you set your step amount, you can program your Easy Bolus. When you are in the HOME screen, each time you
press
the Easy Bolus amount increases by one step. You will hear a beep or feel a vibration for each step increase.
Each beep is a different tone. This makes it easy for you to count the beeps while you are programming your Easy
Bolus.
Easy bolus setup
1
ಘ
Go to the EASY BOLUS OPTION screen.
Main > Bolus > Easy Bolus
Select On/Set, then press ACT. If you do not want to use Easy Bolus, select Off and press ACT.
NOTE: If you are using the remote control, the Easy Bolus must be set to on.
ಘ
Optimizing pump therapy 93