Filter
Top Products
38
Setting the Alarm
1. With the alarm number blinking, press the “c”
button until the correct alarm number blinks.
You can review the current alarm setting.
Note: Pressing “m” when 0 is blinking, moves
you to the next meter setup screen:
“Setting the Sound.”
2. Press the “m” button to move to the hour setting.
3. With the hour blinking, press the “c” button
until the correct hour appears
.
4. Press the “m” button to move to the minute setting.
5. With the minute blinking, press the “c” button
until the correct minute appears
.
6. Press the “m” button to move to the alarm volume
setting
. Default setting is off.
7. With one of the bell icons appearing, press the
“c” button until the desired alarm volume appears.
8. Press the “m” button to return to the main alarm
setup screen.
Repeat steps 1 through 8 (as needed) to set the
other alarms. (You can set up to four alarms.)
An alarm is set if the sound level is set to low or high. This will show
in set-up mode with a bell (alarm) icon displayed. An alarm is off if the
alarm volume is off. This will show in set-up mode with a bell (alarm)
icon with a slash/stroke through it. Any or all of the four alarms (alarm
1 through alarm 4) can be set. An alarm will never sound during a test.
Move to next Set
screen – Sound
Select alarm
Select hour
Select minute
Select alarm volume