PCL-II Emulation
79
Page L. /Inches
This parameter allows you to set physical page length from 2 to 16 inches, in
increments of half an inch. The default is 11 inches.
Config. Print
This option prints the emulation’s parameters and the currently selected
values.
Symbol Set Print
This option prints a list of all the available sets. The character set number
prints to the left of the character set sample.
Reset Cmd CFG Ld
When the printer receives a host data stream reset command in addition to
resetting printer variables, the selected configuration will be loaded.
• Disable.
The printer ignores the reset command when it is received and continues
to use the currently loaded configuration.
• Power-Up Config.
The power-up configuration is loaded when the reset command is
received.
• Current Config.
If you have preset and presaved multiple configurations, then the
currently selected presaved configuration is loaded when the reset
command is received.
• Factory Config.
The factory installed configuration is loaded when the reset command is
received.
