Store Commands
221
store pserver tcpsocket
TCPportnumber
dest
destination
store pserver tcpsocket 5000 dest d1prn
Assign a pre-defined
TCPportnumber
to a particular
destination
on
the LineJet Print Server. Therefore, if you are using a print method that
sends jobs directly to a TCP port number, you still have the option to
process the job data through this destination setting.
store pserver novell passwd
password
store pserver novell passwd mplex
Store the
password
for the LineJet Print Server to use when logging in to
a Novell file server. This
password
would have to match one set on the
file server.
store pserver novell user name
username
store pserver novell user name micro1
Define a
username
on the LineJet Print Server to be used when it logs in
to a Novell file server to find information. This
username
must match a
user pre-defined on the Novell file server.
store pserver novell user passwd
password
store pserver novell user passwd mplex2
Define a
password
on the LineJet Print Server for the Novell user
already defined. This
password
must match the one stored on the Novell
file server. Passwords are optional as long as there is not one defined on
the file server for the user.
store pserver novell fserver add|del
fileservername
store pserver novell fserver add fs1
Add or remove a server entry on the LineJet Print Server for the Novell file
server it will be servicing.
store pserver smb workgrp
newworkgroupname
store pserver smb workgrp eng
Define a different Windows workgroup as defined by
newworkgroupname
for the LineJet Print Server to be visible within. By
default, the print server only comes up within the group called
“WORKGROUP.”
store pserver from default
Set all general print server settings back to factory defaults.
store pserver from current
Store all current general print server settings to flash memory so they are
retained after a power cycle. This ensures all current settings match what
is stored in flash memory.
store rprinter add|del
printservername printernumber
destination
store rprinter add pserver1 0 d1prn
Add or delete the RPRINTER settings on the LineJet Print Server for a
Novell environment. The
printservername
must be the name of an
existing PSERVER.NLM on your Novell file server. The
printernumber
is the printer number within this PSERVER.NLM. The
destination
is
the queue on the LineJet Print Server where the print jobs will be sent to.
