SOFTWARE CONFIGURATION
3
Parameter Default Setting
Auxiliary Serial Port
Data TX Enabled (checked)
Pass Through Disabled (checked)
Parameters
Baud Rate 115200
Parity None
Data Bits 8
Stop Bits 1
Ethernet Port
Status Enabled (checked)
Eth_speed Auto
DHCP Disabled
IP_address 172.16.11.221
IP_netmask 255.255.0.0
IP_gateway 172.16.0.254
IP_dns1 172.16.0.21
IP_dns2 0.0.0.0
Digital I/O Settings
Digital Input Lines Settings
Debouncing for Input 1, 2 and 3 5 ms
Debouncing for Encoder 500 µs
Debouncing for PS and PSAUX 5 ms
PS Active Level Overridden by Op. Mode Active Closed
Encoder Active Level Overridden by Op. Mode Active Closed
PSAUX Active Level Overridden by Op. Mode Active Closed
Input 1 Active Level Overridden by Op. Mode Active Closed
Input 2 Active Level Overridden by Op. Mode Active Closed
Input 3 Active Level Overridden by Op. Mode Active Closed
Digital Output Lines Setting
Output 1
Line State Normally Open
Activation Event Complete Read
Alternative Activation Event Multiple Read
Deactivation Event Timeout
Alternative Deactivation Event None
Deactivation Timeout (ms) 50
Output 2
Line State Normally Open
Activation Event No Read
Alternative Activation Event Partial Read
Deactivation Event Timeout
Alternative Deactivation Event None
Deactivation Timeout (ms) 50
29
