A SERVICE OF

logo

Open as PDF
next previous
INSTALLATION
2
2.5 TYPICAL LAYOUTS
The following typical layouts refer to system hardware configurations, but also require the
correct setup of the software configuration parameters (see par. 3.2 for details).
Other layouts require the use of a specific SC6000 Controller model.
The accessories and cables indicated in the following figures are Datalogic products. We
suggest their use to guarantee the correct system functioning.
2.5.1 Standard Layout
For Standard layouts the following connections can be made:
• Ethernet direct or through Hub;
• point-to-point on the Main interface using either RS232 or RS485 full-duplex
communications to Host;
• directly to a modem for remote Host communications.
Figure 21 - Ethernet Connection
Figure 22 - Main Connection
13