SOFTWARE CONFIGURATION
3
3 SOFTWARE CONFIGURATION
3.1 GENIUS™ INSTALLATION
Genius
™
is a new Datalogic scanner configuration tool providing several important
advantages:
• Multi-language version;
• Defined configuration directly stored in the device;
• Communication protocol independent from the physical interface allowing to consider the
device as a remote object to be configured and monitored.
To install Genius™, proceed as follows:
1) Turn on the PC that will be used for configuration (Windows 95/98 or NT);
2) Insert the Genius™ CD-ROM;
3) Wait for the CD to autorun and follow the installation procedure.
When running Genius™, the procedure for setting the parameters is supported by a help on-
line, which is displayed in an HTML browser. It can be selected from the Configuration Help
option available in the Help menu. In addition, a context-sensitive help can be enabled by
pressing the <F1> key after selecting the desired parameter.
3.2 GUIDE TO RAPID CONFIGURATION FOR DS6000, DS8100A AND
DX8200A SLAVE SCANNERS
1. Run Genius™ from the configuration PC. The following window appears asking to select
the configuration mode.
Figure 26 - Genius™ Wizard Opening Window
Select Advanced. The Wizard option is not currently available for SC6000.
17
