SC6000
2
Reading Performance Window
This window displays the following data:
• Number of the processed parcels
• Good Read Rate
• No Read Rate
• Multiple Read Rate
Reading Mask Window
This window indicates the node that performed a reading of the codes enabled on the
master.
The following indicators are used:
" * "
The node read a barcode enabled on the master.
" - "
The node read no barcode.
I/O Status Window
This window provides data concerning the conveyor speed and the digital input/output status.
System Info Window
This window provides information about the software release.
2.6.2 Menu Mode
For security purposes, the menu mode is entered by pressing the ENTER and MENU keys at
the same time.
Through this menu, it is possible to perform the following:
• Main Parameter Setting: IP address, Netmask, Gateway address; Profibus address
(for Profibus models); DeviceNet address (for DeviceNet models); supplementary
IP address, supplementary Netmask, and supplementary Gateway address (for
Dual Ethernet models).
These parameters may be set through the Genius™ program (see chapter 3 for
details).
• Date&Time setting;
• DARP™ (Datalogic Automatic Replacement Procedure);
• CASP™ (Cluster AutoSetup Procedure): this procedure allows automatic address
assignment to the scanner cluster nodes. This operation can also be performed by
starting up the system while pressing the SETUP key.
16
