SC6000
2
2.4 ELECTRICAL CONNECTIONS
The connectors available for each scanner model are the following:
Scanner Model Connector Type
Power/Net 25-pin male power supply, lonworks and
input/output signals
Extended I/O 25-pin female extended I/O signals (optoisolated)
Modem 9-pin male modem connection
Main 9-pin female RS232/RS485 main serial connection
Aux 9-pin female RS232 auxiliary connection
All models
Eth-1 RJ45 modular Ethernet network
- 1230
Eth-2 RJ45 modular Ethernet network
- 1211
Profibus 9-pin female Profibus network
- 1215
DeviceNet 5-pin male DeviceNet network
2.4.1 Auxiliary Interface
The auxiliary serial interface is equipped with RS232 interface connections. The interface
can be enabled or disabled through the Genius™ configuration program.
The following pins of the 9-pin connector are used for RS232 interface connection:
9-pin D-sub Female Connector Pinout
Pin Name Function
2 TX Transmit
3 RX Receive
5 GND Ground
5
1
9
6
9-pin D-sub Female Connector
SC6000
USER INTERFACE (Laptop)
5
GND
Signal Ground
TXD
RXAUX
3
RXD
TXAU
2
Shield
Figure 14 - RS232 Auxiliary Interface Connections
8
