Procedures
3-18 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
4
(cont’d)
Global configuration attributes continued
5 Click to save the configuration to the Aastra CNX and to the CompactFlash card.
Step Action
Attribute Default Valid Values/Description
Permanent Ports
Note: This attribute must
be set to an appropriate
number of ports before
using Permanent
conferences.
0 0 to 120
Note: Values are: 0 to 30 for 30-port unit
0 to 60 for 60-port unit
0 to 120 for 120-port unit
Description: Number of ports reserved for permanent
conferences. This value is subject to ports being physically
configured on the Aastra CNX, either T1/E1 ports and/or
VoIP ports. It is also subject to the licensed number of
ports.
Note: Permanent ports are not available for scheduled
conferences.
You must provision the T1/E1 ports, SIP service, or H.323
service on the Aastra CNX before setting the Permanent
Port value. See the following table for applicable settings.
Physical Ports Enabled Maximum Permanent Port Value
1 T1 23
2 T1s 46
4 T1s 92
1 E1 30
2 E1s 60
4 E1s 120
SIP or H.323 service enabled 30
60
120
