A SERVICE OF

logo

Install the Aastra CNX in a rack
1-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Install the Aastra CNX in a rack
Procedure
To install the Aastra CNX in a rack:
Illustration
Warning: Before you install the Aastra CNX unit in a rack, ensure that
the rack is sturdy and well secured.
Caution: The operating environment must provide unobstructed
front-to-back airflow to the chassis that is mounted in a rack.
Step Action
a Mount the rackmount brackets to the Aastra CNX unit in a flush-mount position
using the 6 Phillips head screws.
b Align the bracket holes to the rack and insert truss-head screws (not provided).
c Tighten the screws to 15 in-lb (.69 Nm).
CNX
POWER
STATUS
1 2
COMPACTFLASH
ALARM
ACTIVE
1
10/100 ENET
T1 / E1
2
1
2
3
4
2