A SERVICE OF

logo

Aastra CNX hardware
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 2-5
About the Aastra CNX
Front panel
The Aastra CNX front panel consists of the following:
Status/Power LEDs
Two (2) Ethernet LEDs
Four (4) pairs T1/E1 LEDs
Two (2) CompactFlash memory card slots (slot 1 and slot 2)
The following illustration shows the Aastra CNX front panel.
Aastra CNX Front Panel
Note: One (1) CompactFlash memory card is included with the Aastra
CNX unit and is shipped installed in slot 1. Aastra CNX supports
True IDE mode, and Type I and Type II cards.
POWER
STATUS
1 2
COMPACTFLASH
CNX
ALARM
ACTIVE
1
10/100 ENET
T1 / E1
2
1
2
3
4
Fresh air circulation vents
CompactFlash memory card
Power/Status LEDs
Ethernet LEDs
T1/E1 LEDs
Slots 1 and 2