![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/ff/effb20b7-3f32-4fe8-8158-198f31196a7c/effb20b7-3f32-4fe8-8158-198f31196a7c-bgb4.png)
B-4 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
CALL_END
(Call End Record)
D
- when a user disconnects a call or is disconnected
from the Aastra CNX using call types of TDM, SIP,
or H.323. A CALL_END record includes:
• Caller ID (integer)
• Conference ID (interger)
• Call type (TDM/SIP/H323)
• Caller (SIP/H323 address of the
caller or the caller’s phone
number)
• Reason (Disconnect cause)*
• Duration in minutes
*Disconnect causes could be any of the following:
Record type
Found in
cdrlog files
Found in
confcdrlog files
Aastra CNX generates the record in a log....
Disconnect
cause
Description
NORMAL Normal call clearing (for
example, a hang-up during a
conference).
SHUTDOWN System was shutting down.
NO_RESOURCES All 30/60 ports in use.
LOGIN_FAILED Incorrect pin entered. This
cause may log even if a user
enters the wrong pin once, and
then hangs up.
NOT_STARTED Attempted to log into a
conference that has not yet
started.
NO_PORTS All the reserved ports for the
conference are in use.
EJECTED The moderator ejected the user
off of the bridge.
CONF_OVER User is ejected from the
conference because the
conference time was up.
INTERNAL_ERROR An error condition on the CNX
occurred; check the logs for
error messages.
UNKNOWN Unknown error