3Com Switch 8800 Configuration Guide Chapter 47 SNMP Configuration
47-3
MIB attribute MIB content References
DHCP MIB
—
QACL MIB
—
ADBM MIB
—
RSTP MIB
—
VLAN MIB
—
Device management
—
Private MIB
Interface management
—
47.3 Configuring SNMP
The following sections describe the SNMP configuration tasks.
z Setting Community Names
z Setting the System Information
z Enabling/Disabling SNMP Agent to Send Trap
z Setting the Destination Address of Trap
z Setting Lifetime of Trap Message
z Setting the Engine ID of a Local or Remote Device
z Setting/Deleting an SNMP Group
z Setting the Source Address of Trap
z Adding/Deleting a User to/from an SNMP Group
z Creating/Updating View Information or Deleting a View
z Setting the Size of the SNMP Packet Sent/Received by an Agent
z Disabling SNMP Agent
47.3.1 Setting Community Names
z SNMP V1 and SNMPV2C adopt the community name authentication scheme.
SNMP Community is named with a character string, which is called community
name. SNMP community name defines the relationship between SNMP manager
and SNMP agent. The community name functions like a password, that is, it
controls the access of the SNMP manager to the SNMP agent. You can choose to
specify one or more community name-related features: Define MIB views of all the
accessible MIB subsets.
z Define the read-only or read-write access mode of the community name to the MIB.
The community with read-only authority can only query the device information,
whereas the community with read-write authority can also configure the device.
Perform the following configuration in system view.
