A SERVICE OF

logo

3Com Switch 8800 Configuration Guide Chapter 47 SNMP Configuration
47-2
A
2
6
1
5
2
1
1
2
1
B
Figure 47-1 Architecture of the MIB tree
The MIB (Management Information Base) is used to describe the hierarchical
architecture of the tree and it is the set defined by the standard variables of the
monitored network device. In the above figure, the managed object B can be uniquely
specified by a string of numbers {1.2.1.1}. The number string is the Object Identifier of
the managed object.
The current SNMP Agent of Ethernet switch supports SNMP V1, V2C and V3. The
MIBs supported are listed in the following table.
Table 47-1 MIBs supported by the Ethernet Switch
MIB attribute MIB content References
MIB II based on TCP/IP network
device
RFC1213
RFC1493
BRIDGE MIB
RFC2675
RIP MIB RFC1724
RMON MIB RFC2819
Ethernet MIB RFC2665
OSPF MIB RFC1253
Public MIB
IF MIB RFC1573