3Com Switch 8800 Configuration Guide Chapter 32 ACL Configuration
32-4
Table 32-3 ACL configuration tasks
No. Item Command Description
1
Enter the system
view
<SW8800> system-view
—
2
Configure the
time range
[SW8800] time-range Optional
3
Define a flow
template
[SW8800] flow-template
user-defined slot slotid template-info
Optional
4
Enter the ACL
view
[SW8800] acl Required
5 Define sub-rules [SW8800-acl-adv-3000] rule Required
6
Exit ACL view
Enter Ethernet
port view
[SW8800-acl-adv-3000] quit
[SW8800] interface Ethernet 5/1/1
—
7
Apply a defined
flow template in
the Ethernet port
view
[SW8800-Ethernet5/1/1]
flow-template user-defined
Optional. You
can perform
this operation
only when a
flow template
has been
previously
defined.
8 Activate the ACL
[SW8800-Ethernet5/1/1]
packet-filter inbound
Required
32.2.1 Configuring Time Range
You may set such items in time range configuration: The defined time range includes
absolute time range and period time range. The absolute time range is in the form of
hh:mm YYYY/MM/DD; the period time range is in the format of hh:mm, day.
Perform the following configurations in system view.
Table 32-4 Configure time range
Operation Command
Create time range
time-range time-name { start-time to end-time
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time
end-date ] | to end-time end-date }
Delete time range
undo time-range time-name [ start-time to end-time
days-of-the-week [ from start-time start-date ] [ to end-time
end-date ] | from start-time start-date [ to end-time
end-date ] | to end-time end-date ]
