Endpoint Block Plus v1.8 for PCI Express www.xilinx.com 11
UG343 June 27, 2008
R
Chapter 2
Licensing the Core
This chapter provided licensing options for the Endpoint Block Plus for PCI Express core,
which you must do before using the core in your designs. The core is provided under the
terms of the Xilinx LogiCORE Site License Agreement
, which conforms to the terms of the
SignOnce
IP License standard defined by the Common License Consortium.
Before you Begin
This chapter assumes you have installed the core using either the CORE Generator IP
Software Update installer or by performing a manual installation after downloading the
core from the web. For additional information about installing the core, see the Block Plus
for PCIe
product page
.
License Options
The Endpoint Block Plus for PCIe core provides two license options: a Simulation Only
Evaluation license and a Full license. The Simulation Only Evaluation license is provided
by default with the CORE Generator. The Full license is also free of charge, but you must
register for it on the Block Plus for PCIe product page. See “Obtaining a Full License”
below.
Simulation Only
The Simulation Only Evaluation license, provided by default with CORE Generator, lets
you assess the core functionality with either the provided example design or alongside
your own design, and demonstrates the various interfaces to the core in simulation.
(Functional simulation is supported by a dynamically generated gate-level netlist.)
Full
The Full license provides full access to all core functionality both in simulation and in
hardware, including:
• Gate-level functional simulation support
• Back annotated gate-level simulation support
• Full implementation support including place and route and bitstream generation
• Full functionality in the programmed device with no time outs