Filter
Top Products
Issue 7 44
Fig. 46
Centre tray mounted Pilot+
Cleaning instructions
The tray must be regularly cleaned using
a soapy damp cloth.
Do not use abrasive cleaners or cloths as
they could scuff the surface of the tray
Do not use solvents.
Make sure that the tray is thoroughly
cleaned regularly especially if the chair
is to be used by another user.
Should the control of your wheelchair
become soiled or dirty, it can be wiped
with a damp cloth with a dilute disinfectant
until clean. This is important should the
wheelchair be used by more than one
person to ensure there is no cross
infection.
Fitting
Affix the mounting tube to the underside
of the armrest with the 2 screws
provided. Now slide the extruding bar
into the mounting bracket until it clicks
into place. See Fig. 46.
WARNING
The maximum weight allowed for the tray
is 2.5kg.
Do not to overload the tray, this could
cause the tray to break or could cause
the chair to become unstable.
Ensure that you always have comfortable
access to the controls whilst the chair is
moving and make sure that there is nothing
on the tray that could interfere with your
control of the chair.
It is important that the joystick boot is
replaced if it is torn or brittle, failing to do
so could cause substance damage to the
controller and unexpected movement of
the chair.
Always turn off the power to the controller
before moving the tray out of the way.
Do not leave lit cigarettes or other heat
sources on the tray as this could cause
the tray to deform and mark.
Ensure that all extremities and clothing are
free when positioning the tray for use.
Do not replace the joystick knob with any
unauthorised item. It may cause
hazardous operation and loss of control
of the chair.