Filter
Top Products
Issue 7 16
Receiver
Preparing your wheelchair for use
Fitting footrests
Firstly, offer the footrest assembly at
right angles to the frame (Fig. 5), locate
the stem into the frame tube and swing
assembly forward as shown in Fig. 6 to
lock in position. To swing away the
footrest, simply depress the retaining
catch and turn the footrest out. This can
now be lifted out if required.
Locking knobs
Fig. 5
Fig. 6
Fig. 7
Seat back fitting and removal
The seat back is fitted by sliding the two
mounting tubes into the two receivers as
shown in Fig. 7.
Once in place the two locking knobs
must be firmly tightened to secure the
backrest. To remove the backrest simply
reverse the fitting procedure.
NOTE
Please note this does not apply to
Recaro Seat option.
Retaining catch