Filter
Top Products
Issue 7 24
Angle Adjustable Legrest
Fitting
Follow the instructions for the fitting and
removal of footrests as stated on page
21 and the adjustment of the footplates
as stated on page 22.
To adjust the angle of the legrest undo
the knuckle screw & move legrest to
desired position, once in the position
re-tighten the screw, see Fig. 20 below.
WARNING
The use of an angle adjustable legrest
can affect the stability of the chair. Be
especially careful when riding up or down
slopes.
With the leg in an elevated position it is
more likely that the user could injure the
leg on obstacles in the environment. Make
sure that you are aware of your terrain
and be cautious when driving the chair
that your leg cannot impact on anything
around you.
Do not drive your chair too close to any
source of open flame. With your leg in
an elevated position you may not know
that the bottom of the footplate is getting
hot.
Do not hang items from the legrest, or
allow anyone to stand on the legrest with
it in the elevated or non-elevated position.
This could cause injury to them, to you
or could cause damage to the chair.
Inspect the legrest, footplate and heel loop
regularly for signs of damage or wear.
Damage to the legrest could result in the
users leg being dropped and could cause
injury.
Cleaning Instructions
Footrest - Clean with a damp, soapy
cloth.
Paintwork - Clean with a damp, soapy
cloth. Do not use abrasive cleaners or
cloths.
Make sure that the legrest is completely
dry before using.
Loosen the knuckle
joint and adjust
legrest to desired
angle.
Fig. 20