Filter
Top Products
Issue 7 42
Attendant and Dual Control, Pilot+
WARNING
Ensure that you set the speed of the
attendent control to a speed that you can
comfortably follow.
Ensure that you always have comfortable
access to the controls whilst the chair is
moving and make sure that the controller
is fixed securely to the chair.
It is important that the joystick boot is
replaced if it is torn or brittle, failing to do
so could cause substance damage to the
controller and unexpected movement of
the chair.
Always turn off the power to the controller
when leaving the user in the chair.
Do not replace the joystick knob with any
unauthorised item. It may cause
hazardous operation and loss of control
of the chair.
Cleaning instructions
Should the control of your wheelchair
become soiled or dirty, it can be wiped
with a damp cloth with a dilute disinfectant
until clean. This is important should the
wheelchair be used by more than one
person to ensure there is no cross
infection.
Note
The Attendant control system is the
Standard Control System mounted at the
rear of the chair for use by an attendant
only. Please refer to the Standard Control
System user guide for usage instructions.
See pages 34 - 40.
You should be aware that the attendant
has the power to overide the control of
the chair on a dual control system.