Filter
Top Products
35 Issue 7
The Penny and Giles Pilot + control pod
Fig. 35
Adjustable speed setting
Your controller has five speed settings.
To adjust:
1. Press the mode button until the speed
settings indicator is flashing (Fig. 35).
2. Increase or decrease the speed
setting by pushing the joystick to the
left or right respectively, until the
required setting is obtained. To
activate the setting either push the
joystick forwards to drive or press the
mode button until the flashing lights
are no longer flashing.
3. When the third or middle speed
indicator light is selected on a 10 km/
h chair, the vehicle is set at 4mph.
Please note that this is the
maximum speed permitted for
pavement travel.
Battery level indicator
This has ten colour coded lights, 3 red,
4 orange, and 3 green, and denotes the
state of charge of the batteries (Fig. 36).
Green is high, Orange is low, and Red is
dangerously low. The most accurate
reading is attained when the chair is
stationary and on a level surface. The
lights also help indicate the position of a
fault (should the need arise). When in
fault, the lights will flash quickly. Noting
the number of lights flashing may help
your service agent in simple fault
finding.
Adjustable speed
setting indicator
Fig. 36