Filter
Top Products
Issue 7 38
The Penny and Giles Pilot + control pod
Fig. 41
Programme port
Fig. 42
Red
indicator
lights
Actuator mode function
This will be included on your remote
control pod if you have one or more
electric options fitted to your chair. Refer
to Fig. 41.
Menu select
To chose an electric option press the
mode button until the red lights are visible
on the wheelchair diagram next to the
joystick. Move the joystick to the left or
right to indicate which function can be
used.
Legrest left Backrest recline
Seat tilt
Legrest right Both legrests
When the desired function has been
chosen you can activate the electric
actuator system.
If you attempt to operate the electric
functions when driving, the chair will
automatically come to a safe stop. We
recommend you only use the electric
options whilst stationary.
Up/down movement
Once the relevant electric option has
been chosen the required movement is
achieved by moving the joystick forwards
or backwards.
Programme port
This will enable an approved service
agent to reprogramme your chair and
also gain useful information when tracing
any faults (Fig. 42).