Filter
Top Products
20
• To access the VPAP III ST-A menus:
Press the Left key (menu) while the VPAP (or Ramp) screen is displayed.
• To scroll through items within a menu or submenu:
Press the Up/Down key.
• To enter a submenu:
Press the Left key (enter).
• To change a setting option for a function:
1. Press the Left key (change).
2. Press the Up/Down key until the desired setting option appears.
3. Press the Left key (apply) to select the setting option.
• To exit without changing options:
Press the Right key (cancel).
• To exit out of a menu or submenu:
Press the Right key (exit).
Note: You can return to the VPAP (or Ramp) screen at any time by holding
the Right key for at least three seconds.
Menu Functions (Detailed Menu only)
The VPAP III ST-A menu functions are summarized in Tables 2–5 below with a
brief description of what each function does and the available setting options. To
access these functions, see “How to Use the Detailed Menu (if enabled by your
clinician)” on page 18.
Settings Menu
The Settings Menu allows you to view and change certain operating features of
the VPAP III ST-A.
Table 2: Settings Menu Functions
Function Default Function Description Setting Options
Mask ULTRA Selects your mask type. MIRAGE, ULTRA,
STANDARD, MIR FULL
Refer to your mask
User Guide for the
setting for your mask.
Tube Length 2m Selects the length of air tubing
connecting your mask to the
VPAP III ST-A.
2m / 3m (6’6" / 9’10")