ResMed VPAP III ST-A Sleep Apnea Machine User Manual


 
7Setting up the VPAP III ST-A System
!
WARNING
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
The air filter cover protects the device in the event of accidental liquid
spillage onto the device. Ensure that the air filter and air filter cover are
fitted at all times.
3
Connect one end of the air tubing firmly onto the air outlet of the VPAP III ST-A
(D-2).
!
WARNING
Only ResMed air tubing should be used with your flow generator. A
different type of air tubing may alter the pressure you actually receive and
reduce the effectiveness of your treatment.
4
Assemble your mask system according to the mask user instructions.
5
Connect your mask system to the free end of the air tubing (D-3).
The VPAP III ST-A system is now assembled (D-4). To start treatment, see
“Starting Treatment” on page 11.
Attaching a Humidifier
!
WARNING
When using a humidifier, position it lower than you, and at the same level
or lower than the VPAP III ST-A.
Note: You must activate the humidifier option in the menus if you are using a
HumidAire or Passover humidifier.
Attaching a HumidAire 2i Humidifier
Please refer to the illustrations in section E of the illustration sheet.
The HumidAire 2i attaches to the front of the VPAP III ST-A to provide heated
humidification. No other accessories are required for its use. The VPAP III ST-A
automatically detects the presence of the HumidAire 2i. No menu changes are
required. Please refer to the HumidAire 2i User’s Manual for details.
Attaching a HumidAire 2iC Humidifier
Please refer to the illustrations in section F of the illustration sheet.
The HumidAire 2iC attaches to the front of a VPAP III ST-A to provide passover
humidification. No other accessories are required for its use. Please refer to the
HumidAire 2iC User’s Manual for details.
Attaching a HumidAire Humidifier
Please refer to the illustrations in section G of the illustration sheet.
Medium size (21") air tubing is a necessary accessory for connecting the
VPAP III ST-A to the HumidAire humidifier.