Filter
Top Products
15
Then the code number will appear,
followed by the
R symbol and
mg/dL. Be sure the meter and test
strip codes match. If they do not,
code the meter correctly. (See
pages 10
–12.)
STEP 1
Insert a test strip into the meter.
Insert a test strip, contact bars
end first and facing up, into
the test port. Push it all the way
in until it will go no further.
The meter will turn on and the
display check will appear briefly.
➧
WARNING: If mg/dL does not
appear with the R symbol,
call LifeScan Customer
Service at 1 800-227-8862.
DCO_06405104B_OTU_Uni_OB_US 3/8/06 12:17 PM Page 15