Filter
Top Products
11
STEP 1
Enter the
Code Mode.
Insert a test strip
to turn on the
meter. Push it all
the way in until
it will go no fur-
ther. Avoid
bending the test strip. The display check will
appear. Then the code number is displayed for
three seconds.
The first time you use the meter, three
dashes Q will flash, meaning that there is no
code stored in the memory. Follow Step 3 to
code the meter. If three dashes appear any
other time, see page 50 of Display Messages
and Problem-Solving Guide.
STEP 2
Match the Code Numbers.
Compare the code number on the meter
display with the code number on the test
strip vial. If the two code numbers match,
you may begin testing. If they do not match,
follow Step 3.
CAUTION: Matching the code on the meter
and the code on the test strip vial is essential
to obtain accurate results. Each time you test,
check to make sure the code numbers match.
Note: Date and time
will flash briefly.
Example
Example
DCO_06405104B_OTU_Uni_OB_US 3/8/06 12:17 PM Page 11