Filter
Top Products
12
STEP 3
Code the Meter.
Immediately press the button, while the
code number is displayed on meter to select the
correct code. Each time you press and release
the button, the number will increase by
one. To move more quickly, press and hold the
button.
Note: If the apply blood symbol is displayed
before the meter is coded correctly, remove the
test strip and repeat steps 1 through 3.
Note: If you scrolled past the desired code
number, continue to press the button until
the correct code number appears.
After selecting the correct code number, it will
flash for three seconds and then appear solid
for three seconds.
CAUTION: Matching the code on the meter
and the code on the test strip vial is essential to
obtain accurate results. Each time you test,
check to make sure the code numbers match.
Then the symbol will appear with mg/dL,
indicating that the OneTouch
®
Ultra
®
System is
ready for testing.
WARNING: If mg/dL does not appear with
the symbol, call LifeScan Customer
Service at 1 800 227-8862.
Example
Example
DCO_06405104B_OTU_Uni_OB_US 3/8/06 12:17 PM Page 12