72
11.3 Drive Wheels
Inflation.
1. Locate air valve and remove air cap.
2. Check the pressure rating marked on the side of the tyre and inflate as necessary.
CAUTION
•
Do not over inflate tyres. As with any vehicle, the
wheels and tyres should be checked periodically for
wear.
Removal.
1. Release and remove the central screw using a hex
wrench.
2. Pull the wheel away from the chair. It may be
necessary to use some force.
CAUTION
•
If the wheel rim is to be spilt to change a tyre, it is
important that the bolts holding the rim are not
released if the tyre is pneumatic and inflated.
NOTE:
The recommended inflation pressure is 40 PSI / 280 KPA / 2.8 Bar.