Filter
Top Products
40
6. Armrests
WARNING
•
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hard-
ware is tightened securely - otherwise injury or damage may result.
•
It is important for regular inspection to be carried out on the Armrests for signs of visible
damage. If any repairs are required, these should be carried out by an INVACARE dealer.
6.1 Installing/Removing Armrests
WARNING
•
Make sure the armrest release and height adjustment handwheels are in the locked position
before using the wheelchair.
NOTE:
Be sure to fit the correct armrest on the corresponding side of the wheelchair.
Installing
1. Check the armrest removal handwheel is loose and not visible inside armrest socket.
2. Insert bottom of armrest tube into armrest socket and gently push down.
3. Turn armrest removal handwheel until tight and armrest is secure.
4. Repeat STEPS 1-3 for the opposite side armrest.