Filter
Top Products
37
5.2 Legrest height adjustment
1. Remove any accessory from the legrest(s).
2. Remove the legrest from the wheelchair. Refer to INSTALLING/REMOVING LEGRESTS in this
section of the manual.
NOTE:
Lay the footrest on a flat surface to simplify this proce-
dure.
3. Loosen the legrest height adjustment screw using a
hex-wrench
4. Reposition the lower section (with foot plate) to the
desired height.
5. Tighten the legrest height adjustment screws. Ensure
the screws are secure.
6. Repeat STEPS 1-5 for the opposite side of the wheel-
chair legrest, if necessary.
7. Reinstall the legrest(s) onto the wheelchair. Refer to
INSTALLING/REMOVING FOOTRESTS in this section
of the manual.
Legrest stem
Height Adjustment Screws
Removing
1. To remove the legrest, push the release lever either upwards/downwards, rotate legrest outwards
and lift upwards.