Filter
Top Products
57
Seat Board Adjustment
1. Remove the seat cushion (see section
8.1).
2. Using a cross point screwdriver loosen the
fixing screws.
3. Slide the seatboard until it reaches the
desired position.
4. Re-tighten the fixing screws using a cross
point screwdriver.
5. Replace the seat cushion.
2. Using a hex wrench loosen the adjustment screws.
3. Gently pull/push the side of the seat until it reaches the desired position.
4. Re-tighten the adjustment screws using a hex wrench.
5. Repeat for opposite side of chair.
Seatboard
Adjustment
Screw
Legrest
Adjustment
Screw