Filter
Top Products
62
Removing
WARNING
•
NEVER allow any of your tools and/or battery cable(s) to contact BOTH battery terminal(s)/
post(s) at the same time. An electrical short may occur and serious personal injury or damage
may occur.
•
The use of rubber gloves and chemical goggles is recommended when working with batteries.
NOTE:
Perform this procedure on one (1) battery and battery box at a time. Repeat procedure for other
battery box.
1. Ensure the Joystick is switched off.
2. Remove the Rear Battery Cover.
3. Remove screws from front battery cover.
4. Remove the actuator from the fixing location under the seat.
5. Tilt the seat fully towards the rear of the chair.