Filter
Top Products
54
8 Seating
WARNING
•
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
•
It is important for regular inspection to be carried out on the Armrests for signs of visible
damage. If any repairs are required, these should be carried out by an INVACARE dealer.
8.1 Installing / Removing Seat Cushion
CAUTION:
•
This adjustment should only be made when the chair is unoccupied and the joystick unit
switched off.
Installing/Removing
NOTE:
The cushion inner may be removed from the nylon cover by sliding it out from cover flap on the
underside of the cushion.
1. Ensure the hook and loop fastener strip on the seat is visible (remove covering strip if neces-
sary).
2. Position the cushion on the seat with the wedge shape end at the wheelchair front and push
down to secure.
3. To remove, pull up on cushion to release the hook and loop fastening. Remove cushion from
seat.