Invacare Terminator BB Wheelchair User Manual


 
SECTION 7—FOOTREST/ ANTI-TIPPER
Part No 1114851 67 Everyday and Sport Series Wheelchairs
Adjusting Anti-tipper
ƽ WARNING
When anti-tippers are used, anti-tippers MUST be adjusted to maintain a 1-1/2 to
2-inch clearance between the bottom of the anti-tipper wheels and the ground/
floor. This spacing should always be checked whenever adjustments/changes are
made to the wheelchair. Failure to maintain proper spacing may result in the chair
tipping over backward causing serious injury or property damage.
1. Pressinthereleasebuttonthatsecurestheantitipperwheelstotheantitipperbar.
2. Adjusttheheightoftheantitipperwheelstobetween11/2and2inchesofthe
ground/floor.
3. RepeatSTEPS12fortheoppositeantitipper.
Replacing Anti-tipper
ƽ WARNING
When anti-tippers are used, anti-tippers MUST be adjusted to maintain a 1-1/2 to
2-inch clearance between the bottom of the anti-tipper wheels and the
ground/floor. This spacing should always be checked whenever adjustments/changes
are made to the wheelchair. Failure to maintain proper spacing may result in the
chair tipping over backward causing serious injury or property damage.
1. Pressinthereleasebuttonthatsecurestheexistingantitippertotheantitippersocket
andremovetheantitipperfromtheantitippersocket.
2. Insertthenewantitipperintotheantitippersocketuntilreleasebuttonengages.
3. Pressinthereleasebuttonontheantitipperbarandinstalltheantitipperwheelsonto
thenewantitipperbar.
4. RepeatSTEPS13fortheoppositeantitipper.
5. Measurethedistancebetweenthebottomoftheantitipperwheelsandtheground
floor.
6. Ifnecessary,adjusttheheightoftheantitippers.RefertoAdjustingAntitipper
on
page 67.
PART NUMBER MEASUREMENT
1112178
21 - 1/8-inches