Invacare Terminator BB Wheelchair User Manual


 
SECTION 7—FOOTREST/ ANTI-TIPPER
Everyday and Sport Series Wheelchairs 66 Part No 1114851
FIGURE 7.5 Adjusting the X-terminator and Transformer Footrests - Transformer Height
Adjusting/Replacing Anti-tipper
ƽ WARNING
Anti-tippers MUST be attached at all times. Inasmuch as the anti-tippers are an
option on this wheelchair (you may order it with or without the anti-tippers),
Invacare strongly recommends ordering the anti-tippers as an additional safeguard
for the wheelchair user.
Anti-tippers MUST be fully engaged. Ensure the release button of the anti-tipper
fully protrudes out of the hole in the anti-tipper socket.
Ensure both anti-tippers are adjusted to the same height.
NOTE:Forthisprocedure,refertoFIGURE 7.1.
NOTE:ToensurethecorrectmodelantitipperisusedrefertoFIGURE 7.1.Measurementsfor
antitippersareapproximateandaretakenusingthetopadjustmentholeontheantitipper
(DetailʺAʺ).
Footrest
Tubing
Half Clamp
Mounting Screw
Adjustment Holes
Half Clamp
Coved Washer
Coved Washer
Mounting Screw/
Threaded Sleeve