SECTION 5—WHEELS
Part No 1114851 39 Everyday and Sport Series Wheelchairs
NOTE:Ifreplacingrearwheels withadifferentsizethanwhatwasoriginallyonthewheelchair,
thefrontcasterheightmustalsobechangedtokeepthewheelchairframeparalleltothefloor.Refer
toAdjustingFrontCasterHeightonpage 55ONLYaftercontactingInvacare.Anti‐tipperheight
(ifapplicable)mustalsobeadjustedtomaintain1‐1/2to2‐inchclearancebetweenbottomofthe
anti‐tipperwheelsandthefloor.RefertoAdjusting/ReplacingAnti‐tipperonpage 66.
Opening/Closing Camber Clamps
ƽ WARNING
QUICK RELEASE LEVERS - Make sure the quick release levers are in the closed
position before using the wheelchair, otherwise personal injury or damage to the
wheelchair may occur.
STANDARD AND SUSPENSION CAMBER CLAMPS - Make sure the hex screws
are securely tightened before using the wheelchair, otherwise personal injury or
damage to the wheelchair may occur.
CAUTION
A4 CAMBER SYSTEM ONLY - DO NOT close the quick-release levers or tighten
the socket screws or hex screws without camber inserts in the axle tube. Damage to
the axle tube will occur.
NOTE:Forthisprocedure,refertoFIGURE 5.6.
1. Performoneofthefollowingtoopenacamberclamp:
•QuickReleaseLevers‐Pullthequickreleaselevertotheopenposition.
• StandardCamberClamps‐Loosen,butDONOTremovethesocketscrewonthe
camberclamp.
•SuspensionCamberClamps‐Loosen,butDONOTremovethehexscrewonthe
bottomrearofthecamberclamp.
2. Performoneofthefollowingtocloseacamberclamp:
•QuickReleaseLevers‐Securethequickreleaselevertothecamberclampby
threadingitcompletelyintothecamberclamp.Pushthequickreleaseleveronthe
camberclampstothe
closedposition.
• StandardCamberClamps‐Securelytightenthesocketscrewtosecuretheaxle
tube.
•SuspensionCamberClamp‐Securelytightenthehexscrewonthebottomrearof
thecamberclamptosecuretheaxletube.