Filter
Top Products
SECTION 5—WHEELS
Part No 1114851 51 Everyday and Sport Series Wheelchairs
FIGURE 5.15 Replacing Axle Tube
Adjusting the Axle Tube
ƽ WARNING
QUICK RELEASE LEVERS - Make sure the quick release levers are in the closed
position before using the wheelchair, otherwise injury or damage to the wheelchair
may occur.
STANDARD and suspension camber clamps - Make sure the hex screws are
securely tightened before using the wheelchair, otherwise injury or damage to the
wheelchair may occur.
CAUTION
A4 CAMBER SYSTEM ONLY - DO NOT close the quick-release levers or tighten
the hex screws without camber inserts in the axle tube. Damage to the axle tube
will occur.
NOTE:Standbehindthewheelchairtodetermineleftorright.
Axle
Tube
Camber
Clamp
Camber
Insert
Set Screw
Indexing Ring
Rear of
Wheelchair
Camber
Insert
Toe Adjustment
Ring
Slot in
Axle Tube
Notch in
Axle Tube
Camber
Clamp
Axle
Tube
A4 Camber System
Front of
Wheelchair
Camber Tube 2000
Rear of
Wheelchair
Front of
Wheelchair
NOTE:Suspensionoptionnotshown
forclarity.Axletubeinstallsinthe
samemanneraspicturedabove.